MT6200-PC 433Mbps 5G Wireless Outdoor AP/CPE
MT6200-PC 433Mbps 5G Wireless Outdoor AP/CPE
MT6200-PC 433Mbps 5G Wireless Outdoor AP/CPE
MT6200-PC 433Mbps 5G Wireless Outdoor AP/CPE
MT6200-PC 433Mbps 5G Wireless Outdoor AP/CPE

MT6200-PC 433Mbps 5G Wireless Outdoor AP/CPE

  • BrandMSTIAN MT6200-PC
  • OriginShenzhen,China
  • Standard IEEE802.11n/a/ac
  • Transmission Rate 300Mbps
  • Working ModeWDS/Repeater/AP
  • Power Supply POE 24V
  • Count


MT6200-PC is an 11ac 5G outdoor CPE with LED display. It comply with 802.11ac Wi-Fi standard, data rate up to 450Mbps, Build in 11dBi panel antenna, the Wi-Fi range to up to 1000 meters. With LED display, wireless AP, Wi-Fi repeater, WDS operation mode, it work in pairs for point to point connection, make more than 16PCS IP camera can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.


433Mbps Data Rate

MT6200-PC features 802.11ac Wi-Fi and MIMO technology, 450Mbps wireless speed ensures high speed internet access and more end users access.


High Gain Antenna for more range

With 11dBi MIMO high gain antenna, the point to point Wi-Fi range up to 1KM distance. What’s more, it can supply the stable Wi-Fi signal for 15PCS IP Cameras in 500 meters.


Power over Ethernet

MT6200-PC has integrated passive Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.


Multiple Operation and LED Display

MT6200-PC support gateway, wireless AP, Wi-Fi repeater, WDS operation mode, it can apply to almost wireless application scene; Then it with LED display to show AP/Client operation mode, Channels, IP address and Signal Strength; What’s more, it is easy to setup CPE-80R’s IP address, RF Power, Channels by set switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.


Access Controller System & Cloud Management System

With Access Control System under AP operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....


Then work with Cloud Management System, easy to do central and remote management, advertisement and multiple authentication make this AP more professional in Wi-Fi Projects.


Main Features:

lComply with IEEE 802.11ac/a standard, 5G,450Mbps Data Rate

l1*10/100Mbps WAN Port,1*10/100Mbps LAN Port

lBuild in 11dBi MIMO panel antenna, stronger signal strength, more wireless coverage

lWAN Port support passive PoE

lSupport SSID broadcasting, Multi SSID up to 4

lSupport Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WDS operation mode

lWith function of build in firewall, IP filter, URL filter and MAC filter 

lComply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment

lSupport DDNS, VPN pass through, Port forwarding and DMZ host

lSupport 64/128-bit WEP security, 128bit WPA (TKIP/AES) security


Wireless Technology 802.11ac/a standard, 433Mbps  MIMO Technology
Device Interface 2*10/100Mbps RJ45 Ports
1*Reset Button for restore factory default settings
1*DC power Port
1*WDS Switch Button
Antenna 11dBi directional antenna
LED Indictor Power,wifi,WAN,LAN, Signal Strength
Power DC 12V/1A;24V POE Power
Device Size 168mm*88mm*57.5mm
Transmission Data rate 433Mbps
Software Features
Working Mode Gateway/AP/Repeater/WISP/WDS mode
Communication Standard IEEE 802.11ac
IEEE 802.11a
Wireless Setting Intelligent Channel Analysis
Distance Controll 802.1x ACK Time Output
Virtual SSID up to 4
Wireless Security WEP Encryption-64/128/152 bit
WPA/WPA2 Personal Encryption (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise Encryption (WPA-EAP using TKIP)
System Setting Web-based configuration (HTTP/Telnet)
Firmware Upgrade Upgrade firmware via web browser or TFTP
Administration Management Admin User name/Password can be configured
System Monitoring Device and Networking status statistic
Log Support local log, host log, log file exporting
Reset Reset to factory defaults
Backup Backup device configuration, then restore this configuration if need
Application Environment
Temperature Working Temperature: -20°C~50°C
Storage Temperature: -40°C ~ 70°C
Humidity Working Humidity 5%~95%  RH No condensation
Storage Humidity 5%~95%  RH No condensation

    Write a Comment
    Comment will be posted once reviewed.