MT6200-CB 300Mbps 2.4G Ceiling Mount AP
MT6200-CB 300Mbps 2.4G Ceiling Mount AP
MT6200-CB 300Mbps 2.4G Ceiling Mount AP

MT6200-CB 300Mbps 2.4G Ceiling Mount AP

  • BrandMSTIAN MT6200-CB
  • OriginShenzhen,China
  • StandardIEEE802.11n/g/b
  • Transmission Rate300Mbps
  • Working ModeFit/Fat
  • Power SupplyPOE(IEEE802.3af/at)
  • Count
Details

MT6200-CB is an indoor ceiling mount wireless access point for hotels, cafe, hosptical,school and home. Comply IEEE 802.11n 2T2R MIMO Technology, 300Mbps high speed, integrated 48V IEEE 802.3af PoE, it can be installed in areas where power outlets are not readily available, easy installation and lower cost; Housed in a ceiling mountable case, the MT6200-CB can be installed on a wall or ceiling to blends in nicely with most interior decorations in the house, to extend optimum wireless signal. Work with WLAN Controller, centralized configuration and management, easy to achieve WiFi Coverage and maintenance, access into Cloud Server to do remote monitor and Captive Portal authentication for more business value.

Features
300Mbps High Data Rate

Equipped enterprise high performance Qualcomm Chipset, Comply IEEE 802.11n 2T2R MIMO Technology, 300Mbps high speed, allow all connected devices to achieve faster upload/download Ethernet.Equipped with Qualcomm Chipset and powerful amplifiers, create a strong far-reaching signal, pass through walls to reach to corners, to supply a fast and stable WiFi network.

Power over Ethernet(PoE)

Integrated IEEE 802.3af standard Power over Ethernet (PoE), work with PoE switch or PoE adapter, pluy and play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

Multiple Operation Mode for Multiple Application

Support Wireless AP, Gateway, WiFi Repeater to meet with different installation requirements, such as Gateway for home use, WiFi Repeater to extend the exist WiFi signal to more range


Multi SSID, Tag VLAN, AC Controller Centralized Management, Cloud Server Captive Portal Authentication

Support Multi SSID up to 4, each SSID support tag VLAN for User isolation. Work with WLAN Controller, centralized configuration in IP address, SSID,Password, Tag VLAN, RF power adjustable, then remote management, easy to achieve WiFi Coverage and maintenance. Besides that, access into cloud server to do advertisement and Captive Portal authentication guest, to create more business value.

Specification
Hardware
Wireless 802.11n, 2T2R  300Mbps  MIMO Technology
Interface 1*10/100Mbps RJ45 Ports
1* Reset Button to restore factory default
Antenna 2.4GHz MIMO High Gain omni 5dBi Internal Antenna
Power PoE: IEEE 802.3af 48V PoE
Size 157*36mm
Data Rate 300Mbps
Firmware
Operation Mode Gateway, Repeater, Wireless AP
Network Protocol IEEE 802.3(Ethernet)
IEEE 802.3u(Fast Ethernet)
IEEE 802.11n/g/b
Wireless Setting Wireless Analyzer
Distance Control 802.1xACK Time output
Multi SSID up to 4
BSSID
Wireless Security WEP Encryption-64/128/152 bit
WPA/WPA2 Personal Encryption (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise Encryption (WPA-EAP using TKIP)
Hide SSID
System Setting Web-based configuration (HTTP/Telnet)
Firmware Upgrade Upgrade firmware via web browser or TFTP
Administration Management Admin User name/Password can be configured
System monitoring Device and Networking status statistic
System Log Support local log, host log, log file exporting
Reset Reset to factory defaults
Backup Backup device configuration, then restore this configuration if need
Operating Environment
Temperature Operating Temperature: 0°C~55°C
Storage Temperature: -40°C ~ 70°C
Humidity Operating Humidity  5%~95%  RH Non condensing
Storage Humidity  5%~95%  RH Non condensing




    Write a Comment
    Comment will be posted once reviewed.